ID Coating Device
The ID Coating Device is a versatile adaption kit for internal diameter cold spray coating applications. The device is designed to be adapted to the Impact Gun 6/11 EvoCSII and to be operated at maximum gas pressure and temperature.
Intelligent design guarantees intensive cooling of the spray head and the de Laval nozzle, in order to ensure long hardware life and economical operation of the process. Water cooling is integrated in the ID Coating Device.
Internal diameter applications of cold spray coatings are used in aerospace, IGT, automotive and general engineering applications.
- The most important key facts
- Minimum Diameter of 84mm (3.3 inches)
- Flexible nozzle design for different applications and diameters
- Water cooled spray head and nozzle
- Central/axial injection of spray powder into de Laval nozzle
- Standard device length of 350 mm (13.8 inches)
- Customized device length upon request
- Easy assembly to Impact Gun 6/11 EvoCSII
- Integrated water cooling
Central Injector Kit
The Central Injector Kit is a versatile adaption kit for the Impact Innovations Cold Spray Gun in order to ensure flexible and centric powder injection in the convergent section of a de Laval Nozzle.
The device is designed to be adapted to the Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII and to be operated at maximum gas pressure and gas temperature.
Centric powder injection is required for those powder materials, which are either sensitive to temperature or are being used at fine particle size distribution.
- The most important key facts:
- Central/axial injection of powder into the convergent section of a de Laval nozzle
- Flexible adjustment of exact position and alignment of powder injector
- Adaption to the Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII
- Easy assembly to Impact Gun
- Customization of the device upon request
Cooled Powder Injector
The Cooled Powder Injector is an assembly part for the Central Injector Kit. It is connected to the Central Injector Kit and cools the injector tube with compressed air.
This is useful for soft materials, which tend to stick to the injector.
This assembly can be customized to individual length.
- The most important key facts:
- Central/axial injection of powder into the convergent section of a de Laval nozzle
- Adaption to Central Injector Kit
- Cooling with compressed air
- Individual length
- Prevents injector clogging
Prechamber Extension Kit
The Prechamber Extension Kit is specially designed for the Impact Innovations Cold Spray Gun in order to extend the distance between location of powder injection and throat of the de Laval Nozzle. Therefore, it directly influences the dwell time of the spray powder in the convergent section of the de Laval Nozzle.
The device can be adapted to both, the Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII and to the Central Injector Kit. It is designed to be operated at maximum gas pressure and temperature.
- The most important key facts
- Influence on dwell time of the spray powder to enter the convergent section of a de Laval Nozzle
- Standard length of extension: 100 mm, 135 mm, 170 mm
- Customized device length upon request
- Compact design to minimize temperature losses
- Easy assembly to Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII and Central Injector Kit
Injectors
The Injector - OUT1 is an universal nozzle for all kind of powders. This Injector can be used with water, air or no cooling. It can be adapted to the Central Injector Kit and the Prechamber Extension Kit. The Injector - OUT1 fits to both Impact Guns.
The WC nozzle has a high wear resistance and can be used for very hard materials.
The SiC nozzle has a low roughness on the inside of the nozzle and therefor doesn’t clog that easily.
Expansion ratio: 5,60
Length: 160,00 mm
- The most important key facts
- Easy assembly to Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII
- Universal nozzle for all kind of powders
- Fits with Central Injector Kit and Prechamber Extension Kit
- Can be used with water, air or no cooling
- Nozzle available in SiC or WC
- The most important key facts
- Easy assembly to Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII
- Less tendency for clogging
- Fits with Central Injector Kit and Prechamber Extension Kit
- Can be used with water, air or no cooling
- Nozzle available in SiC or WC
The Injector - OUT2 is a shorter nozzle with higher expansion rate, therefore it doesn’t clog that easy. This Injector can be used with water, air or no cooling. It can be adapted to the Central Injector Kit and the Prechamber Extension Kit.
The Injector - OUT2 fits to both Impact Guns.
The WC nozzle has a high wear resistance and can be used for very hard materials.
The SiC nozzle has a low roughness on the inside of the nozzle and therefore doesn’t clog that easily.
Expansion ratio: 9,97
Length: 109,70 mm
The Injector - OUT4 is a longer nozzle specially designed to achieve higher particle velocities. This Injector can be used with water, air or no cooling. It can be adapted to the Central Injector Kit and the Prechamber Extension Kit.
The Injector - OUT4 fits to both Impact Guns.
The WC nozzle has a high wear resistance and can be used for very hard materials.
The SiC nozzle has a low roughness on the inside of the nozzle and therefore doesn’t clog that easily.
Expansion ratio: 7,64
Length: 210,80 mm
- The most important key facts
- Easy assembly to Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII
- Higher particle velocity
- Fits with Central Injector Kit and Prechamber Extension Kit
- Can be used with water, air or no cooling
- Nozzle available in SiC or WC
- The most important key facts
- Easy assembly to Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII
- Higher helium parameters possible
- Low helium consumption
- Fits with Central Injector Kit and Prechamber Extension Kit
- Can be used with water, air or no cooling
- Nozzle available in SiC or WC
The Injector - OUT5 is a nozzle specially designed when using helium as a process gas. Due to the smaller nozzle throat helium consumption is lower and higher parameters are possible. This Injector can be operated with water, air or no cooling. It can be adapted to the Central Injector Kit and the Prechamber Extension Kit.
The Injector - OUT5 fits to both Impact Guns.
The WC nozzle has a high wear resistance and can be used for very hard materials.
The SiC nozzle has a low roughness on the inside of the nozzle and therefore doesn’t clog that easily.
Expansion ratio: 5,60
Length: 160,00 mm
