Powder Swap Container
The Powder Swap Container is an excellent option to increase the production rate of your cold spray process. The container can be filled easily and exchanged quickly during the process without switching off the system completely. Cleaning during operation of the cold spray system is also possible and offers multi-material solutions.
Mixing Chamber Kit
The Mixing Chamber Kit is designed for simultaneous or parallel operation of two Impact Powder Feeders connected to the Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII.
The device has similar benefits like the Y - Piece Kit (10106.00.0.00) but additionally ensures proper mixing of two different powders before being injected into a de Laval nozzle. Especially when powders of different specific weight and / or apparent density will be used, the Mixing Chamber Kit is an advanced tool.
It is designed to be operated at maximum gas pressure and temperature.
- The most important key facts
- Connection between two Impact Powder Feeders and the Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII
- Spraying two powders with different properties
- Spraying with a double feed rate
- Simple installation
Y - Piece Kit
The Y - Piece Kit is designed for simultaneous or parallel operation of two Impact Powder Feeders connect to the Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII.
The device has a lot of characteristics and is perfect for the serial production. To refill the Impact Powder Feeder, it is not necessary to shut down the system. Another advantage is that you can double the feed rate when two Powder Feeders are adapted to the system. It is also possible to spray one powder and switch to another, during the operation of the system.
- The most important key facts
- Connection between two Impact Powder Feeders and the Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII
- Allows filling up one Impact Powder Feeder while process is still running
- Spray two different powders one after another
- Spraying with a double feed rate
- Simple to install between the Impact Powder Feeder and the Impact Gun 5/8 EvoCSII and Impact Gun 6/11 EvoCSII
- Useful for grit blasting and preventive nozzle cleaning
Conveyor Discs
The Conveyor Disc 10002.03.0.08 is a standard disc for the Impact Powder Feeder. This Conveyor Disc is recommended for a variety of powders, but especially for powders with poor flowability. Replacing the Conveyor Disc is quick and easy.
In order to influence the powder feed rate, the following factors must be considered:
• Type and volume of Conveyor Disc (number and design of holes)
• Rotating speed of the Conveyor Disc
• Flowability and apparent density of the powder
- The most important key facts
- Flexible operating range
- 120 holes
- Volume: 2,968 cm³
- The most important key facts
- Quick and easy replacement
- Ideal for low and precise powder feed rates
- 240 holes
- Volume: 1,424 cm³
The Conveyor Disc 10002.03.0.09 is an optional disc for the Impact Powder Feeder. The use of this Conveyor Disc is recommended when low and precise powder feed rates are required. Replacing the Conveyor Disc is quick and easy.
In order to influence the powder feed rate, the following factors must be considered:
• Type and volume of Conveyor Disc (number and design of holes)
• Rotating speed of the Conveyor Disc
• Flowability and apparent density of the powder
The Conveyor Disc 10002.03.0.10 is an optional disc for the Impact Powder Feeder. This Conveyor Disc is recommended when using powders with good flowability. Due to the design of the Conveyor Disc, the powder feed rate is more homogeneous and the deposited coating is very uniform.
Replacing the Conveyor Disc is quick and easy.
In order to influence the powder feed rate, the following factors must be considered:
• Type and volume of Conveyor Disc (number and design of holes)
• Rotating speed of the Conveyor Disc
• Flowability and apparent density of the powder
- The most important key facts
- Quick and easy replacement
- Ideal for powders with good flowability
- Homogeneous feed rate and uniform coating
- 492 holes
- Volume: 3,043 cm³
