Impact Water Cooling EvoCSII for Cold Spray systems
Due to the higher thermal capacity of the water, the Impact Water Cooling EvoCSII has a significantly stronger cooling capacity than the air cooling included in the standard scope of the Impact Spray System. This results in more constant coating parameters entailing even more consistent coating results.
By cooling the nozzle, it is kept at a consistently low temperature. Low nozzle temperature results in less wear, tear and lower risk of nozzle clogging.
An integrated tank heating means that the temperature inside the tank can be continuously regulated. As the Impact Water Cooling EvoCSII is fully integrated into the system, desired values can be conveniently entered on the Impact Control Panel.
The stepless temperature control is achieved through the independent modulation of the cooling capacity. Furthermore, there is no need for additional connection lines, as all supply is provided by the control unit Impact EC-GM-Unit EvoCSII.
- Adjustable cooling temperature
- Less nozzle wear
- Avoiding nozzle clogging
- More consistent coating result
- Fully integrated in the control system
Injector Cooling Unit Impact Water Cooling EvoCSII
By cooling the nozzle, it is kept at a constant low temperature. The lower the nozzle temperature, the lower the wear and tear and also the risk of nozzle clogging. The Impact Water Cooling EvoCSII has a significantly higher cooling capacity than the air cooling included in the standard scope. This results in more constant coating parameters, involving a consistent coating outcome.
Seal system
Shrinking on the nozzle is no longer necessary with the new developed seal system, preventing possible seal or nozzle damage.
Cooling effect
Because of the optimized water guidance, the nozzle is cooled more evenly and effective over the entire length. This reduces the risk of nozzle clogging. The increased cooling also reduces nozzle wear.
Dimensions
By revisioning the design, the nozzle cooling has become more compact. Now it is possible to better coat components that are difficult to access.
Water connections
The inclined arrangement of the water connections enables a tight hose routing on the gun. Also, the position of the connections can be variably adjusted. Color codings of the water connections reduces the risk of incorrect installation.
- Quick-change mechanism
With the help of the quick-change mechanism, fast and easy dismantling and assembly of the quick lock water cooling jacket to the quick lock nut is possible. The new type of nozzle clamping avoids tension on the nozzle. In addition, the nozzle is secured against accidental fall out during dismantling by adhering to the special sealing ring.
